Subscribe to Test & Measurement World
RSS
Reprints/License
Print
Email
Average Rating:
  • (0)
    Rate this:
  • Demystifying production test of UWB devices

    Adam Smith, Verigy -- Test & Measurement World, 12/1/2007 2:00:00 AM

    See also:
    A practical approach to production test of UWB devices

    Numerous technologies are emerging to meet consumer demands that traditionally wired products “cut the cord” and move into the wireless domain. One example is ultra wideband (UWB), a communications technology for transmitting data over channel frequencies of 3.5 to 10.5 GHz—frequencies that are used for the wireless video and USB 2.0 signals in numerous household products and appliances.

    The emergence of UWB technology, however, creates both economic and technological challenges. On the economics side, the addition of the UWB communication interface must not add significant cost to the consumer product (television, DVD player, digital camera, etc.). The initial price target for a four-chip UWB set—including an RF front end, an RF transceiver, a digital baseband IC, and a media access controller (MAC)—is less than $15.


    UWB’s bandwidth and channel frequencies present significant test challenges, but you can meet them using standard production testers coupled with creative DFT techniques.


    On the technology side, UWB has unique attributes—such as its wide range of channel frequencies and its 528-MHz bandwidth—that can make testing these devices in high-volume production very challenging.

    In particular, as the ultra-wideband name implies, the modulation bandwidth that the device employs is an order of magnitude larger than even the latest wireless LAN (WLAN) or WiFi devices. Because the technology has some nontraditional test requirements, it is very difficult to use a traditional production test strategy for UWB devices.

    But despite what you may think, you don't need specialized test equipment to test UWB devices. It is possible to meet device manufacturers' test requirements by using a mixture of familiar techniques combined with design-for-test (DFT) creativity. While there are daunting challenges in the testing of UWB devices, a solution can be found on readily available production testers that minimizes the test cost per device. Read more about details of the test challenges and how you can meet them.

    Average Rating:
  • (0)
    Rate this:
  • RSS
    Reprints/License
    Print
    Email
    Talkback
    Similar Content from T&MW

    No related content found.

    • 0 rated items found.

    Datasheets.com Electronic Parts & Inventory Search

    185 million searchable parts
    • Part Number
    • Description
    • Inventory
    • Products
    • Manufacturers
    Canon Resource Center

    Featured Company


    Most Recent Resources

    Featured Job On
    Scroll for More Jobs
    Advertisement
    More Content
    • Blogs
    • Webcasts

    Sorry, no blogs are active for this topic.

    » VIEW ALL BLOGS RSS
    • All


    Advertisement
    Advertisement
    About Us   |   Advertising Info   |   Site Map   |   Contact Us   |   FREE Subscription
    © 2011 UBM Electronics . All rights reserved.
    Use of this Web site is subject to its Terms of Use | Privacy Policy

    Feedback Form
    Feedback Analytics