Crystek debuts pocket reference oscillator at IMS
-- Test & Measurement World, 6/14/2009 4:30:00 PM
Crystek at IMS 2009 highlighted its new RF Pocket Reference Oscillator (RFPRO) series, which integrates a complete true sine wave SAW (surface acoustic wave) oscillator in a rugged SMA housing. Connecting the RFPRO Series’ female SMA side to +3.3 VDC will generate a clean -135-dBc/Hz-phase-noise signal at 10 KHz offset. In effect, each RFPRO is a fixed-frequency portable signal generator. Crystek’s RFPRO Series oscillator offers frequency stability of ±150 ppm over -20°C to 70°C (operating temperature range rated at -40°C to 85°C; storage -45°C to 90°C). RFPRO Series oscillators are available off-the-shelf in 500-MHz and 1-GHz output frequencies.
The company also chose IMS to highlight its CCSO-914X3-1000 1-GHz SAW clock oscillator, which is designed using FR5 PCB and SAW crystal technology to provide -142-dBc/Hz phase noise at 10-kHz offset. It also highlighted its CVCO55CXT-6250-6250 Coaxial Resonator Oscillator (CRO), which operates at 6250 MHz with a tuning voltage range of 0.5 VDC to 4.5 VDC; this coaxial VCO features a typical phase noise of -100 dBc/Hz at a 10KHz offset.
www.crystek.com.
-
FLIR offers IR camera for under $3000
-
Don't let the economy compromise quality (Guest commentary)
-
Danaher speeds up restructuring, acquires life-sciences businesses
-
Agilent’s Cover-Extend technology eliminates need for physical test points for in-circuit test
-
So many combinations: Testing a switch-matrix board
View All Webcasts
