Here, kit, kit...
Brad Thompson, Contributing Technical Editor -- Test & Measurement World, 12/1/2005 2:00:00 AM
Do you remember Heath? No? Eico? Paco? If not, you're probably under 40 and have never practiced electronics as a hobby. Once upon a time, these three companies and others offered test instruments as kits of components. You—the buyer—provided assembly labor and quality assurance, honing your soldering and troubleshooting skills in the process.
Unfortunately, a combination of factors, including loss of free time, loss of interest in hobby electronics, economic pressures, and unfortunate management decisions, ended the days of mass-marketed instrument kits. You can't buy test equipment in kit form today...or can you?
Kits for instruments are indeed still available, but they differ from Heathkits in a number of ways. For starters, changes in technology made some kits obsolete—scratch tube testers and high-voltage power supplies—and regulatory and legal forces have influenced designs. Instead of jousting with safety agencies and bringing AC line voltage into a kit, contemporary kits' designers are likely to opt for battery or "wall wart" power. Fragile glass and high voltages inspire great caution in legal minds, and the CRT-based oscilloscope kit may be gone forever.
Documentation accompanying some of today's kits lacks the level of detail you'd find in Heathkit's gold-standard multipage assembly instruction manuals and may consist of only a few cryptically worded and sparsely illustrated pages.
You're also likely to encounter kits that consist of a printed-circuit board and bags of parts, but that don't include a case to house the completed board. Getting sheet metal enclosures designed and fabricated in quantity remains a major expense and a technical headache for a small-scale kit producer for whom a hundred kits constitutes a major production run. Vendors who do offer kits with cases use off-the-shelf, plastic enclosures that require minimal changes and are easily worked with basic shop tools.
Some of today's kits take advantage of low-cost and versatile microcontrollers. For example, one kit that I assembled can determine a three-leaded semiconductor's generic identity (i.e., FET, bipolar transistor, etc.) and measure a few of its parameters in seconds. Not bad for $50 and a few hours of my time.
The next time that you call, "Here, kit, kit," you just might be surprised by what answers.
Take Good Care of Your RF Calibration Kits
04/30/2000Show Highlights
10/31/2005Engineering or pharmacy?
02/05/2008Show Highlights: DAC 2006, NIWeek 2006
08/31/2006
-
FLIR offers IR camera for under $3000
-
Don't let the economy compromise quality (Guest commentary)
-
Danaher speeds up restructuring, acquires life-sciences businesses
-
Agilent’s Cover-Extend technology eliminates need for physical test points for in-circuit test
-
So many combinations: Testing a switch-matrix board



























