Connect voltage and strain through Ethernet
-- Test & Measurement World, 6/1/2009 2:00:00 AM
IOtech’s 6000 series of networked data-acquisition systems consists of models for measuring voltage or for use with strain gages. The Model 6220 accepts 12 simultaneously sampled voltage inputs (±10 V) with 16-bit resolution. Sample rates reach 100 ksamples/s. The Model 6224 accepts 12 strain-gage inputs with 24-bit resolution, sampling at rates up to 50 ksamples/s. It supports half-bridge and full-bridge sensor circuits. Both models have eight digital I/O channels that you can use to trigger alarms or controls.
Both models also come with IOtech’s Encore software, which lets you control one or more instruments over a network. You can configure each channel to acquire data and store data on a Windows-based PC. You can plot data and store measurements in formats that are compatible with ASCII text files, Microsoft Excel, and National Instruments’ DIAdem. You also can assign signal names, engineering units, and time-stamp data to each channel. Signal-analysis functions include peak, RMS, FFT, and power spectrum.
Prices: Model 6220—$2999; Model 6224—$4799. IOtech, www.iotech.com.
No related content found.
- 0 rated items found.
Datasheets.com Electronic Parts & Inventory Search
185 million searchable parts
- Part Number
- Description
- Inventory
- Products
- Manufacturers
View All Webcasts
