Protek's 3-phase clamp meter measures up to 600 kW
-- Test & Measurement World, 11/19/2008 4:00:00 PM
Joining Protek’s lineup of clamp-on meters is the Model 667C, which measures 3-phase, 3-wire; 3-phase, 4-wire; and single-phase circuits to 600 V at 1000 A with true, reactive, and apparent power measurements to 600 kW. The true-RMS, auto-ranging power meter features a 10,000-count, 4-digit dual LCD that can display five parameters of a phase measurement, and a power meter that can store up to 28 measurements in memory.
With its 2-in. jaw opening, the Model 667C measures volts, amps, kilowatts, voltamperes, voltamperes reactive, kilowatt hours, power factor, and frequency. It operates on four 1.5-V AA batteries and includes an RS-232 serial interface and power monitoring software. For added value, the clamp meter comes with a hard plastic carrying case that accommodates the supplied test leads, test clamps, RS-232 cable, and software. The Model 667C costs $345.
Protek Test and Measurement, www.protektest.com .
May Web-exclusive products
05/01/2004Tegam's RF power meter serves the military
10/27/2008Milliamp clamp meter
11/01/2003True-RMS AC/DC power clamp meter
05/31/2004
-
FLIR offers IR camera for under $3000
-
Don't let the economy compromise quality (Guest commentary)
-
Danaher speeds up restructuring, acquires life-sciences businesses
-
Agilent’s Cover-Extend technology eliminates need for physical test points for in-circuit test
-
So many combinations: Testing a switch-matrix board
View All Webcasts
