Decoupling network meets IEC and ANSI specs
-- Test & Measurement World, 9/1/2009 2:00:00 AM
The CDN 3083-S100M portable coupling/decoupling network from Teseq lets you test power supplies, power cells, and power converters of up to 620 VAC to IEC EN 61000-4-5 and ANSI C62.45 specifications. It injects 1.2-µs and 50-µs combination wave surges at up to 8 kV (open-circuit). It also provides up to 4 kA, 8-µs and 20-µs surges (short circuit) into the main power supply of equipment under test. The network meets all IEC filter-inductance classes (up to 20 A; 20 A to 60 A; and 60 A to 100 A). It provides overload capacity on each 100-A phase during short periods, which lets it handle frequent inrushes of current.
Coupling modes on the network include surge differential, lines to ground, and common to ground with an ANSI coupling set. Decoupling conditions are per IEC 61000-4-5 and ANSI C62.45.
The CDN 3083-S100M includes rugged connectors and a solid ground line to ensure proper connection, which complies with IEC 61010 personal safety requirements. You can place the CDN 3083-S100M on the floor, on a table, or on a wall. It can also be wheel mounted, and the wheels include a brake, which lets you operate the unit on ramps and uneven surfaces.
Base price: $20,800. Teseq, www.teseq.com.
No related content found.
- 0 rated items found.
Datasheets.com Electronic Parts & Inventory Search
185 million searchable parts
- Part Number
- Description
- Inventory
- Products
- Manufacturers
View All Webcasts
