Log In   |  Register Free Newsletter Subscription
Global TMW:
Skip navigation
Zibb
Subscribe to Test & Measurement World
RSS
Reprints/License
Print
Email
Average Rating:
  • (0)
    Rate this:
  • Agilent's signal analyzers enable RF measurement to 7.5 GHz

    The N9000A CXA signal analyzer leverages a library of measurement applications.

    -- Test & Measurement World, 10/20/2009 7:00:00 AM

    Agilent claims its N9000A CXA signal analyzers are low-cost instruments that offer frequency coverage up to 7.5 GHz. Through the use of a variety of built-in and optional measurement capabilities, the analyzers can be configured and reconfigured to meet present and future requirements.

    You can use the N9000A CXA analyzers for general-purpose electronics manufacturing, low-cost R&D, and RF education. In addition to built-in one-button measurements, the CXA leverages a library of measurement applications, including preconfigured test routines for noise figure, phase noise, and analog demodulation. To ensure measurement consistency, the applications are virtually identical to those that run on the Agilent EXA, MXA, and PXA signal analyzers. What's more, the Agilent 89600 VSA (vector signal analysis) software can run inside the instrument, providing analysis of more than 50 demodulation formats.

    According to the manufacturer, the CXA is up to 200% faster than other low-cost analyzers, delivering the speed needed to increase system throughput and reduce system count. For example, the CXA can return a peak-search result in less than 5 ms and perform a remote sweep-and-transfer in less than 6 ms via a LAN. Switching between measurement modes typically takes less than 75 ms.

    Frequency coverage is 9 kHz to 3.0 GHz for the N9000A-503and 9 kHz to 7.5 GHz for the N9000A-507. Other specifications include absolute amplitude accuracy of ±0.5 dB, third-order intermodulation of +13 dBm, displayed average noise level of –161 dBm, and W-CDMA ACLR (adjacent channel leakage power ratio) dynamic range of 66 dB.

    Base prices for the CXA signal analyzers range from $12,657 for the N9000A-503 to approximately $16,360 for the N9000A-507.

    Agilent Technologies, www.agilent.com.

    Average Rating:
  • (0)
    Rate this:
  • RSS
    Reprints/License
    Print
    Email
    Talkback
    Reed Business Information Resource Center

    Featured Company


    Related Resources

    Advertisement

    Related Microsite Content

    Related Links

    • No Related Content Available

    More Content
    • Blogs
    • Webcasts

    Rick Nelson

    Taking the Measure

    Rick Nelson
    November 17, 2009
    IT and productivity
    IT departments are understandably concerned about uptime and security issues, as...
    More

    Jennifer Kempe

    Engineering Education and Careers

    Jennifer Kempe
    November 17, 2009
    Reversing virtual reality with GPS navigation
    What if you drove solely by your GPS? While many programs strive to create...
    More

    » VIEW ALL BLOGS RSS

    EDN's Designing with LEDs
    Advertisement
    TMW Video - www.tmworld.com/video/
    NEWSLETTERS
    Test Industry News
    Automotive, Aerospace & Defense
    Communications Test
    Design, Test & Yield
    Machine-Vision & Inspection
    Instrumentation



    Please read our Privacy Policy

    About Us   |   Advertising Info   |   Site Map   |   Contact Us   |   FREE Subscription   |   Editorial Calendar
    © 2010 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.
    Use of this Web site is subject to its Terms of Use | Privacy Policy
    Please visit these other Reed Business sites