Subscribe to Test & Measurement World
RSS
Reprints/License
Print
Email
Average Rating:
  • (11)
    Rate this:
  • PXI expands to multiple processors

    The PXImc lets you expand your system beyond a single chassis.

    Martin Rowe, Senior Technical Editor -- Test & Measurement World, 11/18/2009 2:54:06 PM

    The PXI Systems Alliance has announced the PXImc (PXI MultiComputing) specification in two parts: hardware and software. Systems that comply with the new specification may have more than one processor module, thus increasing computing power.

    PXI MultiComputing specification

    PXImc-based systems can have one or more PXImc processors to increase processing power in test systems

    Think of PXImc like a local network for PXI/PXIe (PXI Express). A system's primary controller, called a Primary System Host, can communicate with a PXImc processor device over a PCI backplane, a PCIe (PCI Express) backplane, or a cabled PCIe port through an NTB (nontransparent bridge). With an NTB, the host controller can't see instrument cards across the bridge. The host can see only the PXImc device and instruments connected directly to the host, not through a bridge. Each PXImc device and the instruments behind it appear as a single PXI node to the Primary System Host. A PXImc device contains a processor, memory, a PCI/PCIe root complex, and an NTB.

    The primary System host can be a stand-alone PC or a PXI/PXIe embedded controller. The connection runs from a stand-alone PC to a PXI/PXIe chassis through a cabled PXIe port. If you use an embedded PXI/PXIe controller as the Primary System Host, then the connection to a PXImc controller can be over the chassis backplane.

    The figure shows two possible configurations. A PC connects to a PXI chassis where the chassis controller is a PXImc controller. In this configuration, the host can't see any of the chassis instruments. In the embedded-controller chassis, the host can see some instruments and the PXImc controller, but the host can't see the instruments beyond the PXImc controller.

    The PXImc lets you expand your system beyond a single chassis. If you need a system with a PC as a primary host and need more than one instrument chassis or other PXImc-compliant device, you can connect the host to an external cabled PCIe switch to add ports.

    You can download the PXImc hardware and software specifications at www.pxisa.org/Specifications.html.

    Average Rating:
  • (11)
    Rate this:
  • RSS
    Reprints/License
    Print
    Email
    Talkback
    Similar Content from T&MW

    No related content found.

    »MORE

    • 0 rated items found.

    Datasheets.com Electronic Parts & Inventory Search

    185 million searchable parts
    • Part Number
    • Description
    • Inventory
    • Products
    • Manufacturers
    Canon Resource Center

    Featured Company


    Most Recent Resources

    Engineering Careers
    Jobs sponsored by
    Advertisement
    More Content
    • Blogs
    • Webcasts

    Rick Nelson

    Taking the Measure

    Rick Nelson
    April 23, 2010
    Gates forms council to address energy innovation
    Bill Gates and Chad Holliday take to the op-ed page of the Washington Post today...
    More

    Matthew Yiu

    Engineering Education and Careers

    Matthew Yiu
    April 21, 2010
    MIT robotically works towards helping stroke patients
    MIT researchers are closely studying how robotic therapy could potentially help...
    More

    » VIEW ALL BLOGS RSS
    • All


    Advertisement
    Advertisement
    About Us   |   Advertising Info   |   Site Map   |   Contact Us   |   FREE Subscription
    © 2011 UBM Electronics . All rights reserved.
    Use of this Web site is subject to its Terms of Use | Privacy Policy

    Feedback Form
    Feedback Analytics