Subscribe to Test & Measurement World
RSS
Email
Average Rating:
  • (5)
    Rate this:
  • A different Thanksgiving competition

    December 1, 2011

    Thanksgiving occurred last week and chances are you watched football. But, there was another competition on TV that night: Punkin Chunkin on The Discovery Channel. The point behind Punkin Chunkin is to build a machine that can hurl pumpkins. The pumpkins, which weigh between 8 lbs. and 10 lbs., fly through the air propelled by air cannons, torsion catapults, centrifugal-force machines, and other designs. The air cannons hurl pumpkins over 4000 ft. while others typically hurl at shorter distances. Torsion catapults, for example, typically send pumpkins sailing between 1000 ft. and 3000 ft. The 2011 Punkin Chunkin competition ran from November 2 to November 4.John Camping is a member of Team ETHOS (Experimental Torsion Hybrid Onager System) from Beavercreek, OH, which came in third among six competitors in the torsion division. A torsion catapult is based on a classical Greek design that uses rope wrapped around two posts (see photo). The throwing arm goes inside the loop created by the rope. The lever pulls back, twisting the loop. When the lever is released, the ropes try to straighten and the energy stored in the ropes forces the arm forward, which hurls the pumpkin.
    Team ETHOS tortion catapult
    A few years ago, the tension on the vertical posts caused some damage and the team had to rebuild the machine. At that time, Camping integrated a data-acquisition system from Measurement Computing (see photo) into the machine to monitor the tension that the ropes apply to the two posts. He wrote an application note about the measurement system.
    Measurement Computing USB-2404-UI data-acquistion module
    Team members, called “Chunkers,” take the annual competition quite seriously. They spend the year between competitions designing new machines or modifying existing machines. Camping explained that he programmed the data-acquisition system and machined some of the parts himself, a local machine shop donated time to fabricate the more complex parts. He estimated that donated shop time is worth between $15,000 and $20,000k. Much of the material for the machine was also donated, but Camping estimates that the total cost runs between $70,000 and $80,000. Air cannons may cost as much as $150,000 because they need compressors and are more complex than other chunking machines.

    While Chunkers continuously modify and redesign their machines, they’re learning that the pumpkin itself can affect the distance it flies. Camping explained that the size, weight, and distribution of mass in a pumpkin can affect distance, depending on the type of machine used to hurl it.

    Although Team ETHOS didn’t win in its division, the machine didn’t “pie,” meaning that each pumpkin sailed away as opposed to breaking up at the machine.

    Posted by Martin Rowe on December 1, 2011 | Comments (1)
    Average Rating:
  • (5)
    Rate this:

  • January 20, 2012
    In response to: A different Thanksgiving competition
    Precious commented:

    Your tihkning matches mine - great minds think alike!

    POST A COMMENT
    Display Name
    captcha

    Before submitting this form, please type the characters displayed above. Note the letters are case sensitive:

    Advertisement
    Advertisement
    Advertisement
    About Us   |   Advertising Info   |   Site Map   |   Contact Us   |   FREE Subscription
    © 2011 UBM Electronics . All rights reserved.
    Use of this Web site is subject to its Terms of Use | Privacy Policy

    Feedback Form
    Feedback Analytics