Manufacturing

• 04.29.2013
• type: Test How-To
• Save & Follow
  Save to My Library Follow Comments Follow Author

Want to avoid troubleshooting while at an expensive test facility? Most don’t have the means to perform formal radiated immunity testing, but here’s how to evaluate it using simple low-cost instruments. Read More...

• 04.03.2013
• type: Test How-To
• 1 Comment(s)
• Save & Follow
  Save to My Library Follow Comments

A closer look at the test and diagnostic methods included in IEC 60730 Class B in order to ensure safe operation of embedded control hardware and software for home appliances. Read More...

• 03.15.2013
• type: Test How-To
• Save & Follow
  Save to My Library Follow Comments Follow Author

Electricity is like the genie in the bottle. By following the relevant safety standards, keeping the power of electricity safe in a harnessed environment is an achievable goal of safe product design. Read More...

• 03.05.2013
• type: Test How-To
• Save & Follow
  Save to My Library Follow Comments Follow Author

Learn about the IEC standards process, the publication history of IEC 61010-1, the structure of the standard, and the significant technical changes that have taken place with the safety requirements in IEC61010-1 over the years. Read More...

• 03.01.2013
• type: Test How-To
• Save & Follow
  Save to My Library Follow Comments Follow Author

Ten important safety tests help protect users, products, and surroundings. Read More...

• 02.19.2013
• type: Test How-To
• Save & Follow
  Save to My Library Follow Comments

As MIPI Alliance standards gain increasing acceptance in the world of mobile device design, engineers need to become proficient at electrical PHY layer compliance testing for the higher speed M-PHY serial interconnects. Read More...

• 05.22.2013
• type: Product Brief
• Save & Follow
  Save to My Library Follow Comments Follow Author

Useful for a range of applications, from aerospace and defense to automotive and component test, the PXIe-4112 and PXIe-4113 programmable power supplies from National Instruments each provide two 60-W power-supply channels from a single PXI Express slot. Read More...

• 05.20.2013
• type: Product Brief
• Save & Follow
  Save to My Library Follow Comments Follow Author

Two new models join Geotest–Marvin Test Systems’ broad line of PXI chassis: the GX7200, a 21-slot PXI Express chassis, and the GX7800, an 8-slot PXI chassis. Read More...

• 05.20.2013
• type: Product Brief
• Save & Follow
  Save to My Library Follow Comments Follow Author

Kepco has introduced several enhancements to its EL series of single- and dual-channel DC electronic loads, including increased current capability of up to 800 A at 5 kW for all low-voltage models. Read More...

• 05.18.2013
• type: Product Brief
• Save & Follow
  Save to My Library Follow Comments Follow Author

TDK-Lambda has expanded its Z+ series of programmable DC supplies with the addition of models that furnish 800 W of output power, as well as a selection of output-voltage ranges covering 0 to 100 VDC and output current of up to 72 A. Read More...

• 05.14.2013
• type: Product Brief
• Save & Follow
  Save to My Library Follow Comments Follow Author

Part of the HYAMP III series of manual ground-bond testers from Associated Research, the Model 3145 provides up to 40 A of DC ground-bond test current for alternative-energy and solar test applications. Read More...

• 05.12.2013
• type: Product Brief
• Save & Follow
  Save to My Library Follow Comments Follow Author

GL Communications has introduced an LTE X2 interface emulator to test and verify eNodeB implementations through its MAPS (Message Automation & Protocol Simulation) platform, a protocol simulation and conformance test tool that can emulate a variety of protocols over IP, TDM, and wireless networks. Read More...